Hitches & Towing

If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Sienna (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

A CURT anti-rattle hitch pin provides smoother, quieter towing by tightening down your trailer hitch connection and deterring noise and vibrations. The anti-rattle kit is comprised of a threaded pin and shim. The shim inserts into the towing accessory shank and can then be installed into the receiver. Then, the threaded hitch pin inserts into the side of the receiver and gets tightened down with a wrench. Together, the hitch pin and anti-rattle shim lock the shank in place and promote a quiet and more enjoyable towing experience. This anti-rattle trailer hitch pin and shim device fit a standard 2-inch x 2-inch receiver with a 5/8-inch pin hole. The kit is compatible with hollow-shank accessories only.

The Eclipse is designed specifically to prevent your trailer wires from getting damaged and ruining the look of your car while towing. It magnetically attaches to your hitch and secures wires from the ground. It connects and disconnects in seconds.

If you own a vehicle with a trailer hitch, you know how quickly the receiver tube can get built up with dirt, debris and road grime. It does not take long before inserting a ball mount or hitch-mounted accessory into your trailer hitch becomes more difficult than it should ever have to be. With enough time and moisture exposure, the inside of a receiver tube can become seized up with rust, making it very difficult to use. Keep your trailer hitch's receiver tube clean and protected when not towing with one of CURT's attractive and durable tube covers. This CURT 2" x 2" receiver tube cover is constructed from quality rubber and mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required. Unlike some other hitch tube covers, it features a bracket to be permanently mounted over the receiver tube to prevent misplacing the cover when not in use. It also provides a holder to accept an electrical connector. At CURT, we want to give you a complete towing solution and that includes providing you with the products necessary to maintain your towing equipment. Defend your trailer hitch from the harsh elements with a CURT trailer hitch cover.

If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Infiniti FX35, FX37, FX50 and QX70 (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

If you own a vehicle with a trailer hitch, you know how quickly the receiver tube can get built up with dirt, debris and road grime. It does not take long before inserting a ball mount or hitch-mounted accessory into your trailer hitch becomes more difficult than it should ever have to be. With enough time and moisture exposure, the inside of a receiver tube can become seized up with rust, making it very difficult to use. Keep your trailer hitch's receiver tube clean and protected when not towing with one of CURT's attractive and durable tube covers. This CURT 2" x 2" receiver tube cover is constructed from quality rubber and mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required. At CURT, we want to give you a complete towing solution and that includes providing you with the products necessary to maintain your towing equipment. Defend your trailer hitch from the harsh elements with a CURT trailer hitch cover.

CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Honda Odyssey (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.

Out of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers such as utility trailers, boat trailers, campers, livestock trailers and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount, and are the ideal choice for most pickup trucks and SUVs (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).This particular 2" trailer ball offers a ball capacity of 6,000 lbs. It features a 1" shank diameter, a 2-1/8" shank length, 0" of rise and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torqueing. To give you peace of mind while towing to that next destination, we also carefully test our trailer balls and ensure that each one meets U.S. VESC specifications.

CURT towing starter kits are the all-in-one accessory package to accompany your trailer hitch, equipping you with the necessary components to hitch up and hit the road. Each towing starter kit includes a ball mount and a hitch pin or hitch lock, eliminating the need to purchase these items separately and removing the stress of needing to find components of matching size. This CURT towing starter kit features a Fusion ball mount #45134 with a 2" x 2" shank to fit a class 3, 4 or 5 trailer hitch. CURT Fusion ball mounts are a unique ball mount option, featuring a permanently attached, welded trailer ball. Much like CURT Euro Mount ball mounts, Fusion ball mount trailer balls require no torqueing and can never be loosened or stolen, making them very secure and reliable. The Fusion ball mount in this towing starter kit features a 2" diameter trailer ball, a 2" drop and a 7-1/2" length. It offers a gross trailer weight capacity of up to 7,500 lbs. and a tongue weight rating of 750 lbs. Also included in this towing starter kit is a CURT hitch lock #23021. The lock is a dead bolt-style lock and provides an extra level of security when mounting the Fusion ball mount. Much like a hitch pin, the hitch lock inserts through both the receiver tube of the trailer hitch and the shank of the ball mount. The hitch lock shank can then be secured using the dead bolt lock head. The lock uses an easy-to-operate, quarter-turn activation system and features a chrome-plated finish to ensure solid rust resistance. It comes with two keys and a watertight dust cap to prevent internal corrosion. For the new hitch owner and towing veteran alike, a CURT towing starter kit is the perfect accessory to Bring It.

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Honda Accord, CRV, Element, Odyssey, Pilot and Prelude, Acura Integra, CL, RL, TL and MDX and Isuzu Oasis (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.

No matter what you are towing, CURT towing equipment is intended to get you from point A to point B and to have peace of mind while doing so. Our hitch extenders are no exception. When you have spacing issues with your hitch-mounted accessories such as a bike rack or cargo carrier, or you need to give your ball mount and trailer coupler a little extra room, a CURT hitch extender can help. Hitch extensions are simply receiver tubes that insert into your trailer hitch to add a certain amount of clearance for your vehicle's bumper or spare tire mounted on the back. A hitch extender makes it very easy to give your tow load the room that it requires and helps protect your vehicle from scuffs, scratches and even dents. This CURT hitch extension is designed to fit a 2" x 2" receiver tube opening. It extends the receiver by 8" and features a gross trailer weight capacity of 3,500 lbs. and a tongue weight rating of 350 lbs. CURT hitch extenders, like our ball mounts and trailer hitches, are crafted to be durable and dependable. In addition to the strong steel construction and precise welding, our trailer hitch extenders receive a gloss black powder coat for ongoing prevention of rust, chipping and UV damage.

CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Chevy Traverse, GMC Acadia and Buick Enclave (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.

The Yakima Kickstand conveniently attaches to the tongue keeping the trailer level when un-hitched.

Coupler for 2" balls for RACKandROLL trailer.

The Yakima Safety Pole attaches to either the trailer load bars, or the trailer frame.

Make your tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to insert into the fastener hole in the side of a receiver tube in order to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping your ball mount firmly attached, a CURT hitch lock goes one step further. CURT hitch locks allow you to lock your ball mount into your trailer hitch, deterring theft and preventing anyone from detaching your trailer at the ball mount and towing away your property without your permission. This CURT hitch lock features a barbell design and comes with a 1/2" pin diameter to fit a 1-1/4" receiver tube size. CURT barbell hitch locks are comprised of a pin with two end caps and a round locking mechanism. They are key-operated and activate with a simple 1/4-turn. They also come with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate in towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of your towing setup. For your boat, ATV or camper, keep your toys more secure with CURT hitch locks.

When you mount a ball mount on your trailer hitch, you expect it to stay put. Whatever type of load you are hauling, having towing equipment that can work as hard as you do is a must. For all types of heavy-duty towing, CURT 5/8" hitch pins and clips pack a little extra punch. We make our 5/8" hitch pins out of solid steel and coat them in one of four finish options. All of these finishes offer excellent resistance to rust and corrosion for long-lasting, smooth operation. CURT hitch pins are also constructed with a 105-degree bend, creating a useful handle for a better grip and allowing the pin to stay securely engaged in the trailer hitch and ball mount. This particular 5/8" hitch pin features a zinc finish and comes with a standard retainer hole to accept the included clip. It provides reliable installation for any ball mount or hitch-mounted accessory with a 2" shank, making it the perfect fit for class 3, 4 and 5 trailer hitches.

When you mount a ball mount on your trailer hitch, you expect it to stay put. Whatever type of load you are hauling, having towing equipment that can work as hard as you do is a must. For all types of heavy-duty towing, CURT 5/8" hitch pins and clips pack a little extra punch. We make our 5/8" hitch pins out of solid steel and coat them in one of four finish options. All of these finishes offer excellent resistance to rust and corrosion for long-lasting, smooth operation. CURT hitch pins are also constructed with a 105-degree bend, creating a useful handle for a better grip and allowing the pin to stay securely engaged in the trailer hitch and ball mount. This particular 5/8" hitch pin features a zinc finish and comes with a standard retainer hole to accept the included clip. It provides reliable installation for any ball mount or hitch-mounted accessory with a 2" shank, making it the perfect fit for class 3, 4 and 5 trailer hitches.

Protect your trailer with the Rightline Gear Anti-Theft Coupler Ball and Lock. Fits 1-7/8" and 2" couplers. Bolt-cutter proof and highly visible.

CURT electrical connector brackets provide a simple solution for mounting wiring to your trailer hitch or the rear of your vehicle. Connector wires can be a nuisance when they are just lying around. They can get tangled up with cargo and even damaged. An electrical connector left to hang off the back end of your vehicle is an even greater hazard. Secure, protect and optimize the use of your electrical connector by mounting it with a CURT connector bracket. CURT Easy-Mount electrical brackets are an especially convenient option for mounting your connector wiring to your trailer hitch. They mount over the opening of the receiver tube and are held secure using a set of independent screws, meaning there is no drilling or clamping required. Easy-Mount brackets feature solid steel construction, so they will not crack or break like competitive products. This particular CURT Easy-Mount electrical bracket is designed to fit over a 2" x 2" receiver tube opening and provide a sturdy mounting place, right beside your trailer hitch receiver, for a 4-way or 5-way flat electrical connector. When it comes to plugging in your trailer lights, it pays not to skimp out. CURT electrical is the smart way to ensure that your trailer lights and electrical systems are prepared for the road ahead. Keep the power flowing, no matter where your adventures take you, with quality electrical products from CURT.

Anti-Rattle Hitch Pin and Shim (Fits 2" Receiver with 1/2" Hole)

Whether you are an avid mountain biker or a casual rider, you will want CURT along for the ride. CURT bike racks offer both versatility and quality and are available in several different styles to fit your needs. The CURT bike rack support strap is a 1" x 61" strap designed to help stabilize a hitch-mounted bike rack. One end attaches to the bike rack and the other to the tow vehicle. The strap can then be tightened to the appropriate tension to ensure that the load is properly supported for travel. Though the bike rack support strap is required for any bike rack with a 1-1/4" shank, it is recommended for all CURT bike racks.

If you own a vehicle with a trailer hitch, you know how quickly the receiver tube can get built up with dirt, debris and road grime. It does not take long before inserting a ball mount or hitch-mounted accessory into your trailer hitch becomes more difficult than it should ever have to be. With enough time and moisture exposure, the inside of a receiver tube can become seized up with rust, making it very difficult to use. Keep your trailer hitch's receiver tube clean and protected when not towing with one of CURT's attractive and durable tube covers. This CURT 1-1/4" x 1-1/4" receiver tube cover is constructed from quality rubber and mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required. At CURT, we want to give you a complete towing solution and that includes providing you with the products necessary to maintain your towing equipment. Defend your trailer hitch from the harsh elements with a CURT trailer hitch cover.